Drying Cycles Sensor cycles automatically determine fabric dryness. Timed cycles run for the selected time. MIXED LOADS For loads consisting of cottons and poly-blends. COTTONS For cottons and most linens. NOTE: ENERGY STAR® models are tested on COTTONS cycle with default settings (Temp setting on High, Level setting on Dry, and ecoDry default on). TOWELS (on some models) For most towels and linens. BULKY Bedding For large coats, bed spreads, mattress covers, sleeping bags, and similar large/bulky items such as blankets, comforters, jackets, and small rugs. SANITIZE (on some models) This option reduces certain types of bacteria including: Staphylococcus aureus, Pseudomonas aeruginosa and Klebsiella pneumoniae. The anti-bacterial process occurs when high heat is used during a portion of the drying cycle; cool down also will be longer to protect you from a hot garment. NOTE: Do not use this cycle on delicate fabrics. WASHER LINK (on some models) When selected (and if connected to a compatible washer through WiFi communication) the dryer receives load information from the washer to automatically make cycle, dryness, temperature and time recommendations to optimize drying. ACTIVE WEAR (on some models) Clothing worn for active sports exercise and some casual wear. Fabrics include new technology finishes and stretch fibers such as Spandex. Also for clothing labeled Easy Care or Perma Press: For wrinkle-free and permanent press items. QUICK DRY For small loads that are needed in a hurry, such as sport or school uniforms. Can also be used if the previous cycle left some items damp, such as collars or waistbands. NOTE: On some models, the time remaining in the cycle will show counting down in the display. DELICATES For delicate items, special-care fabrics and knits. PERM PRESS (on some models) For wrinkle-free, permanent press and special sports items that need extra drying care. AIR FLUFF (on some models) Provides 10 minutes of tumbling time with no heat. NOTE: On models with AIR FLUFF cycle, select TIMED DRY and set Temp to No Heat. DEWRINKLE (on some models) For removing wrinkles from items that are dry or slightly damp. This cycle is not recommended for delicate fabrics. STEAM Dewrinkle (on some models) For use with larger loads than STEAM Refresh. Ideal for loads left in the dryer for an extended time. STEAM Dewrinkle is recommended for larger loads (9-13 garments). NOTE: Steam cycles are not intended for use with towels. Important - The temperature setting must be set to High and water must be turned on before running the STEAM Dewrinkle cycle. STEAM Refresh (on some models) For slightly wrinkled dry garments. Significantly reduces wrinkles. After the STEAM Refresh cycle, the unit will beep (if Sound is selected) and display “00.” STEAM Refresh is recommended for small loads (3-5 garments). NOTE: Steam cycles are not intended for use with towels. NOTE: A single extremely light fabric item may need to have an additional item included in the STEAM Refresh cycle to achieve optimum results. Important - The temperature setting must be set to High and water must be turned on before running the STEAM Refresh cycle. STEAM SANITIZE (on some models) This cycle will sanitize and remove set-in wrinkles from standard sized loads which are